Table 6.11 -- EDCS attributes whose label begins with G

Label Definition Attribute value type EQ label Code
GATE_TYPE The type of a <GATE>. ENUMERATION   406
GENERAL_DAMAGE_FRACTION A number between 0 and 1 inclusive representing the linearly-scaled fraction of the extent of physical injury/damage to an <OBJECT>. Zero means healthy or undamaged, and one means death or complete destruction. REAL PURE_NUMBER 407
GEODETIC_AZIMUTH The <<VECTOR_AZIMUTH_GEODETIC>> in the horizontal plane at the observer's location, to either a <LINE> passing through the observer, or a vector relative to the observer, or the direction from the observer to an <OBJECT> or <LOCATION>. REAL PLANE_ANGLE 408
GEOGRAPHIC_LIGHT_RANGE The maximum distance at which the curvature of the <PLANETARY_SURFACE> and refraction due to the <ATMOSPHERE> permit a <LIGHT> to be seen from a particular height of eye without regard to the luminous intensity of the <LIGHT>; the geographic light range. REAL LENGTH 409
GEOGRAPHIC_REGION The <REGION> of the <EARTH> in which an <OBJECT> is located. ENUMERATION   410
GEOMORPHIC_DEPTH The <<DEPTH>> of an <OBJECT> below the mean level of the surrounding <TERRAIN> as determined by a corresponding digital elevation matrix; if not obtainable, the mean <<DEPTH>> is used; the geomorphic depth. REAL LENGTH 411
GEOMORPHIC_HEIGHT The height of an <OBJECT> above the mean level of the surrounding <TERRAIN> as determined by a corresponding digital elevation matrix; the geomorphic height; the geomorphic height. REAL LENGTH 412
GEOPOTENTIAL_ALTITUDE The <<ALTITUDE_MSL>> of a given <LOCATION> in the <ATMOSPHERE> in units proportional to the potential energy of unit <<MASS>> (geopotential); the geopotential altitude. REAL GEOPOTENTIAL_ENERGY_LENGTH 413
GLIDE_SLOPE_ANGLE The vertical angle at which an <AIRCRAFT> should properly descend to a touchdown point; the glide slope angle. REAL PLANE_ANGLE 414
GLINT_ANGLE The angle subtended by the glint vector and the surface normal, where the glint vector is the vector that bisects the source vector and the viewing vector at a <SURFACE>. Used by the Phong and Sandford-Robertson BRDF models. REAL PLANE_ANGLE 415
GRADING_TYPE The type and/or number of <TERRAIN_SURFACE_OBJECT> (for example: a <TERRAIN_CUT> or an <EMBANKMENT>) sides for which the local <TERRAIN> has been graded. ENUMERATION   416
GRATING_PRESENT An indication that a passageway is blocked by one or more locked or fixed grates; grating present. BOOLEAN   417
GRID_DIAGONALIZATION The manner in which a grid cell formed by four adjacent data values is divided into two triangular <FACET>s along a cell diagonal; the grid diagonalization. ENUMERATION   418
GROUND_VEHICLE_FUNCTION The function of a ground <VEHICLE>. ENUMERATION   419
GROUND_VEHICLE_PROPULSION_TYPE The propulsion type or technique of a ground <VEHICLE>. ENUMERATION   420
GTRS_GEOTILE The identification of a specific geotile within the Geotile Reference System. The value is coded in a Basic Latin string as a 6-digit alphanumeric designation. The first two letters are the encompassing GTRS megatile, the next two digits are the Easting index of the geotile within the megatile, and the last two digits are the Northing index of the geotile within the megatile. STRING   421
GUIDED_MISSILE_DESTROYER_TYPE The type of a <GUIDED_MISSILE_DESTROYER>. ENUMERATION   422
GUIDED_MISSILE_FRIGATE_TYPE The type of a <GUIDED_MISSILE_FRIGATE>. ENUMERATION   423
GUYED An indication that an <OBJECT> has support <WIRE>s; guyed. BOOLEAN   424

separator bar

http://www.iso.ch/iso/en/ittf/PubliclyAvailableStandards/ISO_IEC_18025_Ed1.html